The Samsung Galaxy M42 5G is a phone that has been out for over six months, but it still doesn’t have TWRP. You might be wondering what to do if you want to Root Samsung Galaxy M42 5G running Android 11 and with the help of Magisk? Well, we are here to answer all your questions!
This guide will walk you through rooting the Samsung Galaxy M42 5G without TWRP using Magisk.
Steps to Root Samsung Galaxy M42
Below I have shown step by step procedure to Root Samsung Galaxy M42. You have to follow every step carefully, or else you may face trouble booting up your device again.
Please read the complete guide before applying the steps. This will avoid confusion.
Things to remember
- Make sure to disable all security Locks on your Samsung Galaxy M42.
- Take Full Backup of your Android device.
- You need a PC to perform the Commands.
- Fully charge your phone.
- Samsung Galaxy M42 Original USB Cable.
Note: Rooting is a complex process, so if you miss any of the below steps will end up bricking your device. So, make sure to follow all the steps carefully as shown.
We are not responsible for any loss and damage to your device. Apply the below steps with your own risk.
Step 1: Unlock Bootloader on Samsung Galaxy M42
- First, we need to enable Developer Options on Samsung Galaxy M42.
- Go to “Settings” on your Samsung Galaxy M42.
- Scroll down to the very bottom of the screen and select “About phone.”
- Next, select “Software information.”
- Tap on the “Build number” 5-6 times.
- Enter your phone’s lock screen PIN/Password/Pattern if prompted.
- You will now see the
"Developer mode has been enabled!"toast message on the screen.
- The next thing we need to enable is the OEM unlocking option on Samsung Galaxy M42.
- Now we are ready to Unlock the Bootloader on your Samsung Galaxy M42.
- First, power off your Samsung Galaxy M42 smartphone.
- Connect your phone to the PC while holding the Volume Down + Volume Up keys together until you see the bootloader screen.
- Now press Volume Up key to enter “Device unlock mode.”
- Again press Volume Up key to confirm Bootloader Unlocking on Samsung Galaxy M42.
- Your device Bootloader is unlocked, and it should reboot automatically.
In any steps, if the particular file is asked you to download, then you can come here and download it. We will update the links according to the latest build by developers.
- Download Magisk App (Latest Version) [Phone]
- Samsung USB Drivers (Optional) – Download [PC]
- Odin Flash Tool (Latest) – Download [PC]
- 7Zip-ZS (Latest) – Download [Install it]
- LZ4 – Download [PC] [Extract the Zip file]
Step 2: Download Stock Firmware for Samsung Galaxy M42
You can download Samsung stock firmware from various sources, but the huge problem is the Speed. By using the Frija tool, you can download stock firmware files at high speed.
- Download Latest Frija Tool.
- Extract the zip file to your windows desktop.
- Open the extracted folder and double-click on the
frija.exefile to launch the tool.
- We need two things, first your phone’s model number and second, and CSC/regional code.
- You can get your phone model number by going to Settings → About phone.
- To view the CSC code, you can download the “Phone Info SAM“ app.
- Once you have the above information, enter the required data in the Frija tool.
- Finally, click on the Download button.
Step 3: Preparing Patched Boot Image file
- Extract the downloaded firmware package on your PC.
- Open the extracted folder, and you will see five firmware files in
- Right-click on the AP firmware file, hover into the 7-Zip option and select Extract files.
- Now you will find several files along with the
vbmeta.img.lz4to LZ4 Installed folder.
- Next we have to convert .img.lz4 to .img file. To do that, follow the below steps:
- Connect Samsung Galaxy M42 device to your PC/Laptop.
- Now copy the “AP” file from the Firmware folder to your phone’s internal storage.
- Now the next step you have to follow on your phone.
Step 4: Patch the AP Firmware File with Magisk App
- Download and install Magisk App on your phone.
- Open the Magisk app from the app drawer.
- Tap on the “INSTALL” button.
- Now here, tap on the “Select and Patch a File.”
- Navigate to the internal storage and select the AP firmware file that you previously copied to the phone.
- Once the file is selected, tap on “LET’S GO.”
- Wait until Magisk patches the file.
- The patched image file can be found in the “Downloads folder.”
- Now connect your phone to the PC and copy the
magisk_patched.tarfile to the “firmware folder” on your PC.
- Now head over to the “LZ4 folder” and copy
vbmeta.imgfile to Magisk Patched folder.
vbmeta.imgfile, right-click on the files, and “Add to archive.”
- Select the Archive format to tar and tap on ok.
- Now you will see the boot.tar Odin flashable file.
Proceed to the next step.
Step 5: Boot your Samsung Galaxy M42 into Download Mode
- First, power off your Samsung Galaxy M42 device.
- Connect your smartphone to your PC while holding the Volume Down + Volume Up keys together.
- You will now see the Bootloader screen.
- Now press Volume Up key to enter Download Mode.
Step 6: Flash Patched Boot.tar using Odin flash tool
- First, extract the Odin zip file to your desktop.
- Open the extracted folder and run Odin3 xxx.exe file.
- Connect your Galaxy device to a PC/Laptop.
- You will see
ID:COMsection light up blue. It means the PC successfully recognizes your phone.
- Click on the following slot buttons and select the corresponding firmware files:
- Tip: For BL, CP, CSC, you have to select files from the “firmware folder”. For AP you have to select the patched boot.tar file (Check Step 6, 14th step.)
- BL: Select the firmware file starting “BL”
- AP: Select the Patched AP firmware file (boot.tar)
- CP: Select the firmware file starting “CP”
- CSC: Select the firmware file starting “HOME_CSC”
- Once all firmware files are loaded to the Odin tool.
- Make sure to untick the Auto Reboot option under the “Options” tab.
- Once done, finally, click “Start” to begin the flashing process.
- If the flashing is successful, you should see the PASS message on the Odin screen.
- Once the process completes, press the Volume Down + Power keys to exit Download mode.
- As soon as the screen goes black, press the Volume Up + Volume Down + Power keys to boot into Recovery mode.
- Now once the Galaxy A51 boots into stock recovery mode, follow the below steps.
- The first boot will take some time.
- That’s it! You have successfully rooted Samsung Galaxy M42 using Magisk.
You can also verify if your rooted Samsung Galaxy M42 passes SafetyNet by pressing the “Check SafetyNet” button in Magisk App.
After your device boots up, you will see Magisk App installed on your phone. This app will help you manage Root permissions, install Magisk Modules, Magisk Hide, and other features.
If you can’t see the app, simply download it from here.
Wrapping Up –
We hope everyone found this article helpful in their search for rooting Samsung Galaxy M42 5G! If you have any questions or need help with anything else related to the Samsung Galaxy M42 device, please feel free to leave them below in the comments section. Thanks so much for reading, and happy Rooting!!!